Category:Computers/Tablets & Networking|Printers, Scanners & Supplies|Printer Ink, Toner & Paper|Ink Refills & Kits

Timed white ink circulation stirring system Instruction

The DTF white ink circulation stirring system is customized for DTF white ink printers. By running every 20 minutes for 20 seconds(Default setting, you also can change it), it can prevent white ink from depositing and effectively prolong the service life of the print head.

BUYER NEED TO DISASSBLEM THE PRINTER ,AND REPLACE CENTER TWO WHITE DAMPERS (Special dampers are included).

Turn it on before you first fill up ink.

Double Click Red button to run/stop the process.

Default setting:P:0=0,P:1=1,P:2=5 , PV=0020,SV=00:40.  It runs 20 Seconds every 40 Minutes.

1. Use for DTF White ink only.

2. Change ink filter every 3 months.

3. Change pump tubes(5x3mm diameter special  silicon tube only) very 6 months.

NEVER CONNECT WHITE INK TUBE TO THE AIR FILTER

Voltage:110-220v 50/60Hz

Wattage: 5 watts